Hexa Disassembly

From Ecosynth Wiki
Jump to: navigation, search

Hexacopter disassembly for travel in small airplane box

  1. Remove dome, gps tracker, battery, and receiver
  2. Remove two ribbon cables noting location
  3. Remove GPS and navi board (red board)
  4. Lift up bottom board, but do not remove
  5. Remove props - remember Red is R, then props alternate from there
  6. Remove camera mounts and supports
  7. Remove silver nuts that attach arms to frame, for all but the red and opposite-red bars
  8. Remove screws and slowly slide out arms
  9. Tie arms together in front and back
  10. Remove screws at legs
  11. Disassemble legs
  12. Wrap main body in bubble wrap
  13. Pack up